MWF-18.7/(0.3~0.5)-45
| Quantity: | |
|---|---|
The MWF-18.7/(0.3~0.5)-45 Associated Gas Compressor is designed for compression of associated gas generated during oil and gas production.
During oilfield operations, associated gas is produced together with crude oil and requires suitable compression equipment for collection and utilization. The compressor is designed to handle associated gas under low inlet pressure conditions and increase gas pressure according to field requirements.
The MWF-18.7/(0.3~0.5)-45 provides a flow rate of 18.7 m³/min, with an inlet pressure range of 0.03~0.05 MPa.G and a discharge pressure of 4.5 MPa.G. The compressor adopts a balanced opposed reciprocating piston structure and double-stage compression configuration for associated gas service.
With its configuration for oilfield gas compression, the unit is suitable for associated gas recovery and related gas handling applications.
Associated gas from oil and gas production sites may require pressure increase before further collection or utilization.
The MWF-18.7/(0.3~0.5)-45 is configured for associated gas compression with low inlet pressure conditions. Its operating parameters are designed according to the requirements of gas flow handling and pressure increase.
The compressor can be applied in projects where associated gas needs to be compressed from production areas for further processing or utilization.
The MWF-18.7/(0.3~0.5)-45 adopts a balanced opposed reciprocating piston compressor configuration.
The main configuration includes:
Balanced opposed reciprocating piston structure
Double-stage compression arrangement
Air cooling system
Associated gas compression application design
The compressor configuration is selected according to the requirements of associated gas medium and operating conditions.
The MWF-18.7/(0.3~0.5)-45 is mainly used in:
Used for compression of associated gas generated during oil and gas production.
Applied in gas gathering systems requiring pressure increase.
Used in projects where associated gas needs to be collected and further utilized.
Why is the MWF-18.7/(0.3~0.5)-45 used for associated gas compression?
The compressor is designed for associated gas generated during oil and gas production and is configured for low inlet pressure compression conditions.
The MWF-18.7/(0.3~0.5)-45 is designed with an inlet pressure range of 0.03~0.05 MPa.G and a discharge pressure of 4.5 MPa.G.
The reciprocating piston structure is applied to provide compression capability for associated gas under specified operating conditions.
Selection should consider associated gas composition, flow rate, inlet pressure, discharge pressure, and actual operating conditions.
