ZW-1.46/(1-14.2)-(4-17.2)
| Quantity: | |
|---|---|
ZW-1.46/(1-14.2)-(4-17.2) Liquefied Gas Compressor for Propane and LPG Transfer
The ZW-1.46/(1-14.2)-(4-17.2) Liquefied Gas Compressor is a Z-type reciprocating piston compressor designed for the compression and transfer of low-boiling volatile gases.
The compressor is suitable for liquefied gas media including propane, butane, butene, propylene, and liquid ammonia. It is mainly used in industrial gas systems where stable compression and controlled gas transfer are required.
With a flow capacity of 1.5 m³/min, the compressor operates with an inlet pressure range of 0.1–1.42 MPa(G) and a discharge pressure range of 0.4–1.72 MPa(G). The unit is driven by a 22 kW motor and adopts a water-cooled, oil-free reciprocating piston structure.
The skid-mounted configuration integrates the compressor system into a compact package, providing a practical solution for liquefied gas stations, chemical plants, and industrial gas handling applications.
The ZW-1.46/(1-14.2)-(4-17.2) adopts a Z-type reciprocating piston structure designed for liquefied gas compression.
Main characteristics include:
• Reciprocating piston compression for continuous gas handling
• Water-cooled structure for temperature control during operation
• Oil-free cylinder lubrication design to avoid oil contamination of compressed gas
• Skid-mounted arrangement for integrated equipment installation
The compressor is suitable for liquefied gas compression applications involving propane, butane, butene, propylene, and other compatible media.
The compressor can be applied for compression of:
• Propane
• Butane
• Butene
• Propylene
• Liquid ammonia
The gas compatibility depends on the specific working conditions and customer requirements.
The ZW-1.46/(1-14.2)-(4-17.2) Liquefied Gas Compressor is commonly used in:
LPG Transfer Systems
Used in systems involving liquefied petroleum gas transfer and handling.
Chemical Industry Applications
Suitable for processes involving compatible low-boiling chemical gases.
Industrial Gas Stations
Applied in liquefied gas storage and distribution facilities.
Gas Recovery Systems
Used for compression applications involving compatible volatile gases.
| A piston rod thread protective sleeve ZL 2017 2 1907021.7 |
| A piston ring support device ZL 2018 2 0294776.2 | |
| A range piston ZL 2017 2 190177.0 for symmetrical balanced compressors |
| Integrated long short double compartment ZL 2018 2 0294762.0 |
For selecting a suitable liquefied gas compressor, the following conditions should be considered:
Gas composition
Required flow capacity
Suction pressure
Discharge pressure
Operating temperature
Installation environment
The ZW-1.46/(1-14.2)-(4-17.2) is suitable for applications requiring a 1.5 m³/min compression capacity with medium pressure requirements.
|
|
The compressor in this picture is a non-standard product. The product provides independent solutions tailored to customers' specific usage requirements (flow rate/purity/pressure, usage environment, main purpose, and customer specific requirements), from design to product customization.
Structural form: D-type/M-type/S-type/W-type/V-type/Z-type
Cooling method: water cooling/air cooling/mixed cooling
Installation form: fixed/mobile/pry mounted/cabin type
Drive mode: motor drive/diesel engine start
Transportation: sea/air/land
Packaging:
|
|
|
Metal cabin | Wooden box | Soundproof cabin |
No. | Model | Medium | Flow rate | Exhaust pressure | Motor power | oling meth | Overall dimensions | Weights | |
1 | ZW-0.8/（4.5～15）-（12.5～23） | Industrial ammonia | 0.8 | 1.25～2.3 | 15 | Air-cooled | 1650×650×1050 | 550 | |
2 | ZW-0.8/10-16 | Isobutane | 0.8 | 1.6 | 11 | Air-cooled | 1650×650×1150 | 450 | |
3 | ZW-0.8/10-16 | Liquefied gas | 0.8 | 1.6 | 11 | Air-cooled | 1750×900×1250 | 1200 | |
4 | ZW-0.8/16-24 | Ammonia gas | 0.8 | 2.4 | 15 | Air-cooled | 1800×950×1250 | 1300 | |
5 | ZW-1.0/（1～10）-（5～14） | Methylene chloride | 1.0 | 0.5～1.4 | 15 | Air-cooled | 1700×850×1050 | 600 | |
6 | ZW-1.0/（1～6）-（4～9） | Dimethylamine | 1.0 | 0.4～0.9 | 15 | Air-cooled | 1700×850×1050 | 600 | |
7 | ZW-1. 1/10-15 | Ammonia gas | 1.1 | 1.5 | 15 | Air-cooled | 1700×850×1100 | 700 | |
8 | ZW-1. 1/10-16 | Liquefied gas | 1.1 | 1.6 | 15 | Air-cooled | 1800×950×1250 | 1300 | |
9 | ZW-1. 1/16-24 | Ammonia gas | 1.1 | 2.4 | 22 | Air-cooled | 1650×850×1050 | 750 | |
10 | ZW-1. 1/16-24 | Ammonia gas | 1.1 | 2.4 | 22 | Air-cooled | 1850×950×1300 | 1400 | |
|
|
|
Alibek oilfield in Southern Kazakhstan | Zaozhuang CNG compressor project of Chengdu Shenliang Technology Co., Ltd. | Ningxia Zhongneng new materials engineering |
The compressor is designed for low-boiling liquefied gases and is compatible with media such as propane, butane, butene, propylene, and liquid ammonia. Its reciprocating piston structure provides stable compression for these gas applications.
The Z-type configuration refers to the arrangement of the compressor cylinders and crank mechanism. This structure is used to achieve a compact layout for industrial liquefied gas compression equipment.
The skid-mounted design integrates the compressor and related components into one package, providing a compact equipment arrangement for industrial installation.
This model provides a flow rate of 1.5 m³/min, with an inlet pressure range of 0.1–1.42 MPa(G) and a discharge pressure range of 0.4–1.72 MPa(G). It is driven by a 22 kW motor and adopts water cooling.
